Structure principle:

The boiling dryer is heated by a heat exchanger to form hot air, and enters the main machine through the mesh plate. Due to the effect of wind pressure, the material forms a boiling state in the dryer and is in extensive contact with the hot air, thereby completing in a short time. The material is dried.

Applicable scale:

Laboratory, research institute, college

Applicable industry:

Pharmaceutical industry, such as: drying of wet granules.

Food industry, such as: chicken essence, condiments, dry beverages, etc.

Health products industry particles, such as: drying of tea granules.

Pesticides in the chemical industry, such as: drying of WDG water-dispersible granules.

Drying of wet materials required by other industries.

Main features:

GMP design: Avoid cross contamination.

Drying temperature: room temperature to 99 °C.

Drying time: 1 ~ 8 min / batch.

Temperature control accuracy: ±0.5 °C, precise temperature control.

Number of heaters: 2 independent groups, free to switch.

Manual heating off: 2 groups are independent, arbitrarily selected.

Heating display: The heating light is on, and the heating state can be observed in real time.

Heating control mode: PID control, real-time monitoring, accurate temperature control.

Heating element on/off control mode: electronic, longer component life.

Over temperature alarm: upper limit alarm.

Over-temperature heating automatically shuts off: eliminates material over-temperature scrapping.

Over-temperature automatic cooling: The over-temperature heating is automatically turned off, and the air volume is automatically set to the maximum, without manual guard.

Limit temperature control: electronic.

Electrical heat recovery system: extend the life of electrical appliances and improve heating efficiency.

Air volume adjustment mode: stepless adjustment.

Simultaneous adjustment of air volume and heating: better match the requirements of heating temperature.

Low air volume safety control mode: alarm and automatically turn off the heating to prevent damage to the equipment by mistake.

Run timing function: eliminate the trouble of manual guard.

Gap running function: The material adapts to a wider range.